Select Page

Mo-vis Actuator Keypad


 

Mo-vis Actuator Keypad

The keypad allows controlling of the actuator’s axes (lifts) 1 to 5 on an R-net system.

The keypad is available in two versions: with buttons or with paddles.

There are two different versions of keypads available for CJSM1 or CJSM2 joysticks.

Simple connection: via a 3.5 mm stereo jack into the mode socket of the joystick.

Some R-net parameters need to be set correctly before the keypad is operational. For these settings, we refer to the Curtiss-Wright manual.

 
Mounting

The Actuator Keypad can be mounted In-Line or Sideways on a CJSM1 or CJSM2 joystick.

Actuator Keypads P016-98 and P016-99 (those compatible with the CJSM2 joysticks) are also compatible with the Scoot Control (P015-61).

A sticker sheet comes with the Actuator Keypad to facilitate the use of the keypad. You see some of the possibilities in the pictures. However, the available icons are only suggestions. The user is free to assign his/her own function to each button or paddle.

 

Think WHEELCHAIRS Think SMART

[email protected]

Tel: 01553 404200